Finned Tube Heaters type WD-Z / GG-Z
Our WD-Z and GG-Z finned-tube heaters are designed for industrial application. The ’Z’ addition indicates sand-filled (shock-proof).
Because of their high level of reliability, they are especially suitable for all heating applications at an ambient temperature of up to 60°C. Due to the fact that their construction is in accordance with IP65, they are also suitable for damp areas. The heaters must be installed by skilled personnel. Because of the high surface temperature, they are not suitable for rooms containing inflammable materials and in areas with a possible risk of explosion.
The heater is composed of ceramic centre formers, in wich a glow spiral is encased, in a 1- or 3-phase construction.The connection is robust and can substain high temperatures.
It is possible to insert a second cable gland into the connection box, this will allow for the connection with a room thermostat. A room thermostat (IP30; 0-30°C) may also be placed on the lid of the connection box (in a dry environment).
For industrial use in drying rooms, engine rooms, pumping houses, elevator shafts, as protection from frost, etc.
As a high-level heater in heating coves, waiting rooms, workshops, service areas, etc. [out of hand’s reach, EN 60335-2-30 (e.g. h=1.8 m)].
230 Volt AC 1-phase. Different voltages and outputs can be delivered upon request.
We can also deliver explosion-proof finned tube heaters.
The finned-tube air heaters consist of a 42-mm-diameter round steel tube, with rolled-in steel fins. The rolling-in process ensures the best possible heat transfer by the fins to the environment.
The finned-tube heaters are spray-proof as per IP65. The appliance meets the CE directives. Connection is by means of a plastic cable gland (M20) with pull relief.
Finish: Grey epoxy-coating. The GG-H is identical to the WD-H, but with a galvanised surface. The ’Z’ addition indicates sand-filled (shock-proof)
Types of this product
|Type||Power||Voltage||Length (A)||Mounting (B)||Support
|Weight||Article number||EAN code|
|WD-Z 250||250 Watt||230 Volt||305 mm||223 mm||255 mm||3,2 kg||A020 410 250||8715179001995|
|WD-Z 500||500 Watt||230 Volt||555 mm||473 mm||500 mm||5,2 kg||A020 410 500||8715179002008|
|WD-Z 1000||1000 Watt||230 Volt||1055 mm||973 mm||1000 mm||9,4 kg||A020 411 000||8715179002015|
|WD-Z 1500||1500 Watt||230 Volt||1555 mm||1473 mm||1500 mm||13,0 kg||A020 411 500||8715179002022|
|WD-Z 2000||2000 Watt||230 Volt||2055 mm||1973 mm||2000 mm||17,0 kg||A020 412 000||8715179002039|
|GG-Z 250||250 Watt||230 Volt||305 mm||223 mm||255 mm||3,2 kg||A020 610 250||8715179002046|
|GG-Z 500||500 Watt||230 Volt||555 mm||473 mm||500 mm||5,2 kg||A020 610 500||8715179002053|
|GG-Z 1000||1000 Watt||230 Volt||1055 mm||973 mm||1000 mm||9,4 kg||A020 611 000||8715179002060|
|GG-Z 1500||1500 Watt||230 Volt||1555 mm||1473 mm||1500 mm||13,0 kg||A020 611 500||8715179002077|
|GG-Z 2000||2000 Watt||230 Volt||2055 mm||1973 mm||2000 mm||17,0 kg||A020 612 000||8715179002084|
|Built-up thermostat||A020 200 001||8715179003401|