Flow Heaters
type BVU-DD
Flow heater units exists of an inner- and outer cylindrical thermal galvanised steel hull, with an exchangeable heating element and is intended to prevent cooling as a consequence of heat losses of storage tanks and supply- and return lines and is therefore part of a closed loop heating circuit. This type is suitable for mounting in a piping system.
Application
The Flow heater is intended to prevent cooling as a consequence of heat losses of storage tanks and supply- and return lines and is therefore part of a closed loop heating circuit.
Construction
The Flow heater exists of a Stainless Steel hull with two exchangeable heating elements.
• Deliverable up to 18 kW
• Executed with ¾” BSP threaded sockets
• Adjustable thermostat 0 to 45°C (thermal safety 76°C) or 30 to 85°C (thermal safety 110°C)
• No need for separate junction box
• Flow hull of AISI 316
• Heating elements Incoloy 825
• Maximum working pressure 6 bar
• Equipped with 2 mounting brackets
• 1½” BSP Brass gland
• IP55
This type is suitable for horizontal application
On request the BVU-DD can be delivered in other tensions and power output
Types of this product
Temperature adjustability 30 – 85°C | |||
Type | Output | Voltage | Article number |
BVU-DD 12.0/3-H | 12 kW | 3 x 400 Volt | 631 012 405A |
BVU-DD 15.0/3-H | 15 kW | 3 x 400 Volt | 631 015 405A |
BVU-DD 18.0/3-H | 18 kW | 3 x 400 Volt | 631 018 405A |
Temperature adjustability 0 – 45°C | |||
Type | Output | Voltage | Article number |
BVU-DD 12.0/3-J | 12 kW | 3 x 400 Volt | 631 012 406A |
BVU-DD 15.0/3-J | 15 kW | 3 x 400 Volt | 631 015 406A |
BVU-DD 18.0/3-J | 18 kW | 3 x 400 Volt | 631 018 406A |