Explosion-Proof Steel Finned Tube Heaters type ERB

The Sinus Jevi D8500 gas and dust explosion-proof finned-tube heater has rolled-in ribs, similar to the standard finned-tube heaters. The heating element is composed of stacked stones. The Sinus Jevi explosion-proof finned tube heaters are ISSeP approved and comply with the norms laid down in the European Norms (European Standards)  EN-IEC-60079-0 and EN-IEC-60079-31.
The pressure-resistant construction is approved for gas groups I, IIA, IIB and IIC. Safety from explosion is ensured by a flame proof construction with direct connection (construction d), a maximum surface temperature of 200°C at an ambient temperature of 40°C and a screw lid, whereby the leakage path complies with the requirements laid down for  (connection) boxes of the IIC class. Therefore, the Sinus Jevi explosion-proof finned-tube heater is in line with temperature class T3 and, in accordance with the Norms, it is provided with the reference mark Ex db IIC T3 Gb and Ex tb IIIC T200°C Db.
Through reduction of output, a flame proof construction with a maximum surface temperature of 135°C is obtained, thus meeting the requirements of temperature class T4. Class T4 is provided with reference mark Ex db IIC T4 Gb and Ex tb IIIC T135°C Db. 230 Volt.

Application

The Sinus Jevi explosion-proof finned-tube heaters can be used for heating areas where all possible gases or vapours may be present; for example: on oil/gas rigs, in the chemical and petrochemical industries and areas where combustible and/or inflammable products are stored. On mounting, we recommend that you read the installation manual.
The explosion-proof finned-tube heaters can be regulated by means of an explosion-proof thermostat, type ERT-10.

Construction

° Grey epoxy-coating
° Steel flame proof construction
° Especially suitable for areas with hazardous gases or vapours which are able to explode or ignite spontaneously.
° Max. surface temperature of 200°C at an ambient temperature of +40°C
° ATEX
° EN-IEC-60079-1 Ex II 2G Ex db IIC T3 or T4 Gb
° EN-IEC-60079-31 Ex II 2D Ex tb IIIC T200°C or T135°C Db
° IP 66
° 230 Volt standard max. 690 Volt/18 Amp.
° Messing cable gland M20x1,5 (not included)

Types of this product

Type Article number T3 Output T3 EAN code Type Article number T4 Output T4 Voltage Total
length (A)		 EAN code
 ERB  5 T3 B220 510 400 400 Watt 8715179005382 ERB 5 T4 B225 510 230  230 Watt 230 Volt 650 mm 8715179007072
 ERB  7 T3 B220 710 500 500 Watt 8715179005405 ERB 7 T4 B225 710 320 320 Watt 230 Volt 850 mm 8715179007096
 ERB 10 T3 B221 010 750 750 Watt 8715179005436 ERB 10 T4 B226 010 460 460 Watt 230 Volt 1150 mm  8715179005610
 ERB 13 T3 B221 311 000 1000 Watt  8715179005467 ERB 13 T4 B226 310 600 600 Watt 230 Volt 1450 mm  8715179005641
 ERB 19 T3 B221 911 520 1520 Watt 8715179005528 ERB 19 T4 B226 910 880 880 Watt 230 Volt 2050 mm  8715179005702
 ERB 25 T3 B222 512 000 2000 Watt 8715179005580 ERB 25 T4 B227 511 160 1160 Watt 230 Volt 2650 mm 8715179005764
 ERB 30 T3 B223 012 400 2400 Watt  8715179007041 ERB 30 T4 B228 011 400 1400 Watt 230 Volt 3150 mm  8715179005818